工作原理　

分級機系統由氣流分級機、旋風分離器、收塵器、引風機、電控柜等組成。物料隨氣流由分級機下部進料口高速運動至分級腔內，在高速旋轉的分級輪產生的離心力和氣流產生的向心力作用下，使粗細顆粒分離，符合粒徑要求的細顆粒通過分級輪葉片間隙進入旋風分離器和收塵器收集，粗顆粒夾帶部分細顆粒被分級輪甩出落到分級機下部，自然氣通過導流腔整流成均一旋流，將混雜或粘附于粗顆粒中的細顆粒進一步分離干凈，分離后的粗顆粒從分級機底部粗料口通過旋轉閥排出。分級輪的轉速通過變頻器來控制。

特點  

à  此分級機是德國原裝圖紙，***新理念設計，分級精度更高、配置更合理。

à  分級產品的粒徑***細可達D97：3微米，產品粒度可調。

à  高細度，大產量

à  專為超硬物料的超細分級而設計，陶瓷葉片，腔體內部耐磨防護

à  配合間隙小，氣密封防止大顆粒進入

à  不僅實現了高產量，而且在切割點的精度上保持了卓越的性能。

à  系統負壓運行，粉塵排放量符合國家環保標準。

ATP系列石英專用超細分級機 

實際應用 

石英、陶瓷、耐火材料、鋯英砂、碳化硅等超硬材料行業。

ATP系列石英專用超細氣流分級機

Series Air Classifier

Process

This air classifiers series ATP, has been developed especially for ultra fine cut points. With theATP series we extended our program of the ITC—series. The main point of its development was to achieve a high fineness of the end product. A good sharpness, high efficiency and low specific energy consumption with highest fines output were the guideline for this target. We could achieve these criteria by optimizing the dynamic of air flow, the material resistance and the multi-wheel concept. With this series we can offer an air classifier to meet even the most exciting product requirements. The classifying wheel of the series IMC is especially developed for highest strength during production. The wheel is placed in a horizontal position. The rotor and the drive are designed as a complete module. Also a wear protected wheel can be supplied.

FEATURES

-1-6 rotors in a classifier chamber                      

-Direct driven rotors                                  

-High speed drive system                             

-Adjustable of cut point by variable rotor speed via frequency converter                  -Fine classification with high performance by special wheel design

-Feed from bottom with main air stream for high feed rates

-Best sharpness by most effective coarse classifying zone

-Construction material can be mild steel, stainless steel or wear protected                        

-The solid construction and the selected materials of construction give a long life time with low maintenance costs.