一、用途

此機可與小軋車/樹脂壓染機搭配使用，適用于化驗室定型、烘干、樹脂培烘色等，可模擬生產現場的條件．做預先試驗染料、助劑或整理助劑結牢固度及品質的影響。

Use

Be used with small padder / resin pressure dyeing machine and applicable for lab setting，drying ,resins baking colors and many other processing . It can simulate sopt conditions to test the hardness and quality influence of dyes, auxiliaries and finishing auxiliaries beforehand.

二、主要性能

可控制定型時間，可自動進料出料。

溫度準確，采用熱風循環；溫控電腦帶PID調節，溫度在80℃ -250℃時，精確度達±1% 。

特別設計的針板對于平織布及針織布都能適用，尤其是樣布的經向、緯向張力均可調整。

電源：3相電、380V、6KW

Main Specific Property

Controlled setting times, automatically feeding and discharging;

Precision temperature controlling, hot wind cycle; Temperature controlling computer with PID adjustment; When temperature between 80℃-250℃, the precision can reach ±1%; the specially designed needle plate is applied for both plain stich cloth and knitted fabric, especially the warp and weft tension can be adjusted.

Power: three-phase, 380V, 6KW.

所列規格如有變動，本公司擁有隨時更改權，恕不另行通知。

If the listed specification has any changes,our company has right to modify without notification at any time.